MODELS   202 as of 1.6.97

Function prerequisites No overvoltage/undervoltage circuit 15 off and circuit 15R off and circuit 15c off detected Function Each door control module (N69/1) or (N69/2), (MODELS 202/210 also N69/3 or N69/4) receives over CAN the request for convenience closing and then actuates the power window motor. The motor is actuated until the door control module

detects through position recognition that the window is closed. When operating using the transmitter key or lock switch (, ) the convenience closing function of the power window is also performed for non-normalized windows. The convenience closing function is aborted if the request over CAN is no longer received or lock-up of the power window is detected or the function requirements listed above are no longer satisfied.

	Position recognition for power windows		GF72.29-P-4000A
	Lock up recognition for power windows		GF72.29-P-4001A
	Synchronization of power windows		GF72.29-P-4003A
	Convenience opening of the power windows		GF72.29-P-3004A
	Convenience actuation using transmitter key		GF80.45-P-2003A
	Convenience actuation using lock switch		GF80.45-P-2004A