| All values measured to ground unless otherwise noted | |||
| S16/4 | |||
| 1 | Circuit 15 input supplies backup lamp function | Ignition on 12 VDC | Feed from F1f31 |
| 2 | Backup lamp signal output | Ignition on lever in position R - 12 VDC | see also S16/4 pin1 |
| 3-5 | pins not used | ||
| 6 | Recognition Lever Position 2/3 Output signal | Ignition Off: Lever Position D: >20kOHM Lever Position 2/3: < 1Ohm Measure across Pin 7 |
|
| 7 | Recognition Lever Position 2/3 Input signal | see Pin 6 | |
| 8 9 |
Circuit 50 starter lockout signal input Circuit 50 starter lockout signal output |
Lever pos P or N 12 VDC with key held in start position |
Note 1 |
| S16/7 | |||
| 2 4 |
Kickdown enable power input from BM enables kickdown valve depending upon engine rpm and speed signal | Engine at idle 12 VDC Engine off < 1 VDC |
|
| Note 1 | As of MY 93 relay K38 is installed. Activation from ATA system | ||